服務熱線電話
400-6188-756
超聲波清洗機不震動與什么因素有關?
來源:http://www.99oanet.com.cn/ 時間: 2022-12-09 瀏覽次數: 0
1、電源是否完好,看看超聲波發生器有電進來沒,面板無顯示的話,查查進來的電源有問題沒有。
1. Check whether the power supply is in good condition. Check whether the ultrasonic generator is powered in. If there is no display on the panel, check whether there is a problem with the incoming power supply.
2、超聲波發生器后面的保險絲或線路板上的保險絲是否燒掉。
2. Whether the fuse behind the ultrasonic generator or the fuse on the circuit board is burnt.
3、超聲波換能器經過長期高溫清洗,可能有脫膠或者膠水開裂現象。
3. After long-term high-temperature cleaning, the ultrasonic transducer may have degumming or glue cracking.
4、超聲波清洗機的使用壽命過長,導致超聲波換能器已經老化,需要更換全新?lián)Q能器。
4. The service life of the ultrasonic cleaner is too long, which leads to the aging of the ultrasonic transducer, which needs to be replaced with a new one.
5、超聲波發生器灰塵過多,或受潮,導致一些電路不暢,需清理超聲波發生器內部。
5. The ultrasonic generator has too much dust or is affected with damp, which causes some circuits to be blocked, so it is necessary to clean the interior of the ultrasonic generator.


超聲波清洗機震動小的5大原因:
Five reasons for low vibration of ultrasonic cleaning machine:
1、使用時間比較長,換能器老化,性能衰減,維修方法可以適當增大超聲波功率,但是這種方法會造成換能器的發熱量增大,不能根本解決問題,建議更換全部換能器。
1. The use time is relatively long, the transducer is aged, the performance is degraded, and the maintenance method can appropriately increase the ultrasonic power, but this method will increase the heat of the transducer, which cannot fundamentally solve the problem. It is recommended to replace all transducers.
2、部分換能器損壞,將壞的換能器更換于之匹配的換能器。
2. If some transducers are damaged, replace the damaged transducers with the matching transducers.
3、超聲波發生器與換能器頻率點跑偏。
3. The frequency points of ultrasonic generator and transducer deviate.
4、清洗機工作環境,比如清洗劑種類,清洗溫度,液位深淺等的影響。
4. The influence of the working environment of the cleaning machine, such as the type of cleaning agent, cleaning temperature, liquid level depth, etc.
5 、被清洗物的擺放方式,清洗劑的更換等。
5. The placement method of the cleaned objects, the replacement of the cleaning agent, etc.
以上的精彩內容來自:超聲波清洗機為您提供,更多的精彩內容請點擊進入我們的網站:http://www.99oanet.com.cn
The above highlights come from: ultrasonic cleaning machine is provided for you. For more highlights, please click to enter our website: http://www.99oanet.com.cn
相關產品
相關文章
-
濾芯堵塞=故障高發!碳?xì)淝逑礄C(jī)90%常見問題速解指南 2026-02-04
-
大件清洗破局!科爾通過式噴淋清洗機,360°無死角解鎖高效潔凈 2026-02-02
-
CNC高壓清洗機!復雜工件清洗,高效省心還精準 2026-01-30
-
10萬就能做!可定制通過式噴淋清洗機,解決各類清洗難題 2026-01-28
-
工業清洗想省心?這款噴淋清洗機,輕松搞定各類零件污漬 2026-01-27
-
多槽手動超聲波清洗機的功率和頻率的關系 2026-01-23
-
全自動超聲波清洗機清洗器械時最佳水溫需根據污垢程度和清洗需求決定 2026-01-22
-
超聲波清洗機的結構與組成 2026-01-20
-
低溫廢水回收設備:工業廢水的終結者 2026-01-16
-
噴淋清洗機選擇時需要根據清洗目的、清洗對象、清洗量、清洗方式、清洗效果等來確定適合的型號 2026-01-13

新聞中心




公司動態







魯公網安備37011202000628號